Immediatly usable wireless communication module that is certified with ARIB STD-T66
Description
LAPIS Semiconductor's wireless communication module is compliant to IEEE802.15.4 standard. Since it is certified with ARIB STD-T66, it makes possible to start immediately development and inspection. LAPIS Semiconductor has the line-up of simple use modules and low power consumption LSI.
LAPIS Semiconductor's IEEE802.15.4 solution
Feature
| Part Number | Compliant Standard |
Feature |
|---|---|---|
| MK72220-01 | 2.4GHz band IEEE802.15.4 |
At command ? serial application on LAPIS Semiconductor original network is implemented. Wireless communications can be achieved surprisingly easily only by setting several commands via UART. |
| MK72660-01 | 2.4GHz band IEEE802.15.4 |
By standardized MAC command control, it can execute the varous function of IEEE802.15.4 finely. For development, the easy network software (S-NWK) which targets the remote control applications is provided. |
Line-up
| MK72220-01 | MK72660-01 | |
| for PHY | Yes | Yes |
|---|---|---|
| for MAC | Yes | Yes |
| for NWK | Yes(bulit-in) | S-NWK(provided) |
| Certified Standard | ARIB STD-T66 | |
| Antenna | Chip Antenna | Pattern Antenna |
| Sight Distance* | LOS 70m | LOS 30m |
| Data Rate | 38.4Kbos | 250Kbps |
| HOST I/F | UART | Synchronous Serial |
| Command I/F | Original AT Commands | IEEE802.15.4 MAC commands |
| Power Supply Voltage | 2.7 to 3.6V | 2.1 to 3.6V |
| Operating Temperature | -20 to 60°C | |
| Current Consumption (at operating) |
30mA | 27mA |
| Power Saving Mode | 20µA | 2.7µA |
| Package | 21.5×32.8×2.7 mm | 30.0×32.0×3.1 mm |
| Status | Mass Production | Mass Production |
Certified Wireless Module with Built-in Antenna
MK72220-01 and MK72660-01 are both ARIB STD-T66 certified modules. Both modules have built-in antenna then ready to communicate. Both modules make possible to start experiment and development immediately.
Development Environment (Evaluation Board)
LAPIS Semiconductor's wireless communication module is provided with a starter kit in order to start the evaluatoin and inspection of module and the application development immediately.
MK72220-01 EVB (evaluation board) kit connects with PC by the RS-232 cable, and can begin the evaluation of MK72220-01 and the application development at once.
Attached sample software (S-NWK) enables to make the application development of RF remote control easier.
Preparing the protocol analyzing kit (air-monitor)
- Perytons™ Analyzer (30days limitation)
- ML7246 USB Dongle
Note: The connectivity check between Perytons™ Analyzer and ML7246 USB Dongle has been done.
Note: LAPIS Semiconductor can handle the dongle in Japan market only.
The Perytons™ Analyzers are feature-rich portable tools for troubleshooting and monitoring a variety of wireless networks and protocols in the lab and in the field.
Ex: RF4CE Capture Image
When buying permanent license of Perytons™ Analyzer, please visit Perytons's Web site.
- Analyzable Protocol:
IEEE802.15.4 / ZigBee® / ZigBee® RF4CE / 6LoWPAN - Analyzer Product
Perytons-S (Single Channel)
Perytons-D (Diversity)
Perytons-M (Multi Cannel)
Note: When using Multi Cannel product, you should buy the number of USB dongles (max. 16) that the number of channel you will capture.
About Perytons
Perytons is a leading provider of analyzers for standard and proprietary communication protocols. For wireless and wire-line networks, ‘Network Visibility™’ is critical for quicker time to market, higher product quality, less post release expensive support and higher customer satisfaction. Perytons professional solution provides developers, implementers and field engineers with the best analysis and operation networks monitoring tools, combining advanced feature sets with rich and yet intuitive interfaces. Its offering is built for customization, allowing the support of proprietary protocols. For more information, please visit Perytons's Web site.
Related Pages
Contact
Please inquire from 
.
Communication LSI
HOME