The ML610300 series is a high performance CMOS 8 bit microcontroller with speech functionality, which applied RISC method 8 bits “U8 Core” of LAPIS Semiconductor.
High quality sound playback function and high power speaker amplifier are integrated as hardware, and speech output function is implemented by a monolithic. Sound quality is better and control easier than conventional middleware solutions, maximizing microcontroller performance.
LAPIS Semiconductor's U8 Core featuring high performance with low power consumption. This makes it ideal for use in a variety of applications, including alarms. Moreover, the power supply voltage supporting 3V/5V allows to use not only for battery driven products but also for AC driven products.
- ML610(Q)34x
- Standard type low power microcontroller integrating superior sound playback functions on a single chip.
- ML610Q35x / ML610Q360
- Built-in the self rewrite function which rewrites a part of built-in Flash memory by software and has 8 MHz high-speed clock.
- ML610Q360 includes a 16Mbit P2ROM™ for sound and realizes sound playback more than 10 minutes.
- ML610Q38x
- Integrating sound playback function and LCD driver on a single chip
 |
High performance & Low power consumption
High quality sound playback block
High power speaker amplifier
Support 3V, 5V
|
- By applying three step pipeline RISC architecture, the high performance 8bit CPU ”U8 Core” executing with one instruction per clock cycle is built-in.
- Easy speech playback
- Speech playback is easily implemented by only setting speech data into speech register.
- Since FIFO for 4 words are installed in sound register, the interval for sound data requirement interruption can be set longer.
| Speech playback condition | Sound data requirement interruption time | |
|---|---|---|
| at 16bitPCM, 16kHz | 250uS | |
| at HQ-ADPCM, 16kHz | 1300uS(max) | |
- High performance sound, high power speaker amplifier
- Adopted HQ-ADPCM improves sound quality.
- HQ-ADPCM can compress 20% of the data compared to the conventional ADPCM.
- 16bitDAC（ML610(Q)34□）, 12bitDAC（ML610Q35□）
- Speaker amplifier
- 1.0W at 5V （ML610(Q)34□）
- 0.6W at 3V（ML610Q35□）
| THD＜1.0% | ML610340/ML610346/ ML610347/ML610348 |
ML610Q355/ML610Q356 | |
|---|---|---|---|
| at 5.0V | 1.0W | - | |
| at 3.0V | 0.6W | 0.6W | |
| at 2.5V | 0.3W | 0.3W | |
- Security equipments
- Gas, fire, CO detections alarms
- Portable security goods
- Electronic equipments
- Cooking equipments
- Bath equipments
- Toys
Low power microcontrollers integrating 12bit ADC, UART, SPI, speech synthesis, digital filter, speaker amplifier, and operational amplifier implements monolithic high quality sound playback.
Supporting 3V/5V can be used for from small equipments to large equipments. Variegated speech functions and performance equivalent to the conventional microcontrollers support the customers products.
*If using Internet Explorer 6, please use the scrol bar.
| Part No. | Operating Conditions | ROM/RAM | Functions/Features | Package | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Operating voltage (V) |
Operating*1 frequency |
Current*3 consumption (Typ. @HALT) |
Operating temperature (°C) |
ROM capacity (Byte, Flash) |
RAM capacity (Byte) |
WDT | ADC (method) |
Opera tional amp lifier |
Serial port | |||
| SSIO*7 | UART*8 | |||||||||||
 |
2.2 to 5.5 |
4,096 MHz |
- | –40 to +85 |
Mask 96K |
512 | 1 | - | - | 1 | - | SSOP30 |
|
2.2 to 5.5 |
4,096 MHz |
- | –40 to +85 |
Flash 96K |
512 | 1 | - | - | 1 | - | SSOP30 |
|
2.2 to 5.5 |
4,096 MHz 32kHz |
1.5µA | –40 to +85 |
Mask 128K |
1K | 1 | 12bit×3ch (Sequential) |
3 | 1 | 1 | TQFP64 |
|
2.2 to 5.5 |
4,096 MHz 32kHz |
1.5µA | –40 to +85 |
Flash 128K |
1K | 1 | 12bit×3ch (Sequential) |
3 | 1 | 1 | TQFP
64 |
|
2.2 to 5.5 |
4,096 MHz 32kHz |
1.5µA | –40 to +85 |
Mask 128K |
1K | 1 | 12bit×12ch (Sequential) |
- | 1 | 1 | TQFP64 |
|
2.2 to 5.5 |
4,096 MHz 32kHz |
1.5µA | –40 to +85 |
Flash 128K |
1K | 1 | 12bit×12ch (Sequential) |
- | 1 | 1 | TQFP64 |
Low power microcontrollers adding self rewriting functions and high speed clock into ML610(Q)34x became easier to use. And wide variation of packages contributes to the satisfactory lineup.
The microcontroller performance equivalent to the conventional and low power are suitable for battery driven products.
*If using Internet Explorer 6, please use scrol bar.
| Part No. | Operating Conditions | ROM/RAM | Functions/Features | Package | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Operating voltage (V) |
Operating frequency*2 |
Current*3 consumption (Typ. @HALT) |
Operating temperature (°C) |
ROM capacity (Byte, Flash) |
P2ROM™ capacity (bit) |
RAM capacity (Byte) |
WDT | ADC (method) |
Opera tional amp lifier |
Serial port | |||
| SSIO*7 | UART*8 | ||||||||||||
NEW
|
2.2 to 3.6 |
8.192 MHz 32.768 KHz |
1.2µA | –40 to +85 |
88K+1K*14 (Self-rewritable area) |
- | 1K | 1 | 12bit×4ch (Sequential) |
3 | 2 | 2 | TQFP48 |
NEW
|
2.2 to 3.6 |
8.192 MHz 32.768 KHz |
1.2µA | –40 to +85 |
88K+1K*14 (Self-rewritable area) |
- | 2K | 1 | 12bit×4ch (Sequential) |
3 | 2 | 2 | TQFP64 |
NEW
|
2.2 to 3.6 |
8.192 MHz 32.768 KHz |
1.7µA | –40 to +85 |
160K+3K*14 (Self-rewritable area) |
- | 2K | 1 | 12bit×4ch (Sequential) |
- | 2 | 2 | TQFP64 |
NEW
|
2.2 to 3.6 |
8.192 MHz 32.768 KHz |
1.7µA | –40 to +85 |
160K+3K*14 (Self-rewritable area) |
16M*17 | 2K | 1 | 12bit×4ch (Sequential) |
- | 2 | 2 | TQFP64 |
ML610Q38□ integrates a number of functions required for compact appliances on a single chip, including high-quality speech playback function, LCD driver and etc. Supporting 3V/5V can be used for from small equipments to home appliances.
*If using Internet Explorer 6, please use the scrol bar.
| Part No. | Operating Conditions | ROM/RAM | Functions/Features | Pack age |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Operating voltage (V) |
Operating frequency*2 | Current*3 consumption (Typ. @HALT) |
Operating temperature (°C) |
ROM capacity (Byte, Flash) |
P2ROM™ capacity (bit) |
RAM capacity (Byte) |
W D T |
ADC (method) |
Opera tional amp lifier |
LCD driver |
Serial port | ||||
| l2C | SSIO*7 | UART*8 | |||||||||||||
|
2.2 to 5.5*16 |
8.192 MHz 32.768 KHz |
2.0µA | –40 to +70 |
Flash 128K*10 |
- | 2K | 1 | 10bit×8ch (Sequential) |
- | Max. 96dot 24seg ×4com |
1*5 | 2 | 2 | QFP80 -1414 -0.65 |
|
|
2.2 to 5.5*16 |
8.192 MHz 32.768 KHz |
2.0µA | –40 to +70 |
Flash 128K*10 |
4M*17 | 2K | 1 | 10bit×8ch (Sequential) |
- | Max. 96dot 24seg ×4com |
1*5 | 2 | 2 | QFP80 -1414 -0.65 |
|
|
2.2 to 5.5*16 |
8.192 MHz 32.768 KHz |
2.0µA | –40 to +70 |
Flash 128K*10 |
8M*17 | 2K | 1 | 10bit×8ch (Sequential) |
- | Max. 96dot 24seg ×4com |
1*5 | 2 | 2 | QFP80 -1414 -0.65 |
|
|
2.2 to 5.5*16 |
8.192 MHz 32.768 KHz |
2.0µA | –40 to +70 |
Flash 128K*10 |
16M*17 | 2K | 1 | 10bit×8ch (Sequential) |
- | Max. 96dot 24seg ×4com |
1*5 | 2 | 2 | QFP80 -1414 -0.65 |
Sound data creation uses "Speech LSI Utility" which makes test-listening easier by "Reference Board" with built-In microcontroller. The development of application program uses "IDEU8 Integrated Development Environment" with an intelligible graphical user interface which makes more efficient of a sequence of programing to debugging. Moreover, using compact "On-chip Debug Emulator μEASE" and "Flash programming software (FWμEASE and MWμEASE)", writing sound data and application program into Flash memory, and mounting make evaluation possible.
- OS：Microsoft® Windows
- Windows XP (service pack 2 or later)
- Windows Vista* (service pack 2 or later)
- Windows 7*
*32bit(x86)/64bit(x64)
- Processor and memory: 1GHz Intel® Pentium or equivalent, 512MB RAM
- Hard disk space: 1GB of free space
- Audio system: Windows-compatible sound card supporting at least 16bit and speaker
Please inquire from
Communication LSI
HOME